DC 24V Automatic Door Operator, with Brushless Motor ,CE
certificated
Cirolla motor is specialize in automatic door field for more than
10 years ,supplied in producing kinds of DC MOTORS for automatic
revolving door, sliding door , sliding door Operator, medical
hermetic door, swing door with higher quality and competitive
price.
The DC-motors can be combined with control electronics, gearboxes,
brakes and encoders in a modular system to provide a flexible,
adaptable, market-oriented solution.
Specifications
Automatic door motor
1. 24V DC, 75w brushless motor
2. Gear and worm transmission
3. Steel wheel
Automatic door motor
(1)24V,75W brushless DC motor
(2)Long life span
(3)Quiet,and small in size
(4)High level of efficiency
Competitives:
- Longer life than commutated motors from other manufacturers
- Low detent torques
- High efficiency
- High dynamic acceleration
- Good regulation characteristics
- High power density
- Maintenance-free
- Robust design
- Low moment of inertia
- Motor insulation class E
- Winding insulation class F
- Extremely high short time overload capacity of the motor
- Surface protection
- Minimum interference radiation, optional interference versions
- Protection up to IP 65
- High quality due to fully automated production lines
Intelligence
A)Controlled by the microcomputer digital chips ,giving the control
unit multiple programmable modes including provision to interface
with builidng security system, monitoring the doors position
status,built-in UPS,etc
B)Wide operational parameter setting like speed,hold-on
time,power,etc
Safety
A)Safety bea sensor safety to prevent from clamping person
B)Auto-reversing when confronting with obstacle.
C)UPS when power fails to provide escaping passage
D) The microcontroller also provide the interface for alarming
system ,safety system ,etc
E)Fuse protection at 1A, 250V
F)Protection when working temperature is over setting value
Sliding Door Mechanism Specification
| Door model | Single | Two Panels |
| Door width | 700-1300mm | 600mm-1250mmn |
| Door weight | 150kg | 150kg x 2 |
| Opening speed | 15cm-50cm/s | 15cm-45cm/s |
| Clsosing speed | 10cm-45cm/s | 10cm-43cm/s |
| Hold on time: | 0-9s |
| Motor | brushless 24 volt DC,60W ,high torque 3000r/min |
| Microcontroller | PLC techniques and 16 bit MCU, Visialbe adjustment screen |
| Power supply | 110V-250V,60Hz/50Hz |
| Profile size | 4200mm(L)x 128mm(H)x 100mm(W) |
Sliding Door Mechanism Components
Retro-fit kit |
1 | Motor & Gearbox | 1pcs | China-made 24V,60W ,DC bruthless motor |
2 | Microcontroller | 1pc | 8 bit Microchip chip |
3 | Radar | 2pcs | Optex infrared sensor for sliding door operator |
4 | Learning code remote controller | 1set | Hold-open,lock,exit only, half-open,automatic |
5 | Carriage | 4pcs | 2 running wheel |
6 | Tooth belt | 1pc | 8m, fiberglass tensile elements, nylon surface |
7 | Belt clamp | 2pcs | |
8 | Idle pulley | 1pc | Aluminum alloy |
9 | Stopper | 2pcs | Aluminum alloy |
10 | Connection termial | 1pc | For 220V power ,and outside sensor connection |
Profile |
1 | Track | 1pc | 3mm thickenss, Anodize, height 125mm, depth 100mm,length 4200mm |
2 | Cover | 1pc | 170mm height,anodized |
Options |
1 | Photocell | 1set | factory-,made |
2 | Electro-mechanical lock | 1set | 12V,time delay |
3 | Emergency battery | 1set | 12V,7Ah,contiunously working half an hours |
4 | Control panels | 1set | LCD display, key swtich,5 program adjust |
5 | Floor guide | 2pcs | For frame and frameless door |
6 | Glass clamp | 2pcs | 1m length, fit to 10mm,12mm glass |
Raw Materials:
Tests on machine:
Packing details:
Production line:
